 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DFP Vishay Dale Thick Film Resistor Networks Flat Pack, 11, 12 Schematics FEATURES * 11 and 12 Schematics * 0.065" [1.65 mm] height for high density packaging * Low temperature coefficient (- 55 C to + 125 C) 100 ppm/C * Hot solder dipped leads * Highly stable thick film * Wide resistance range * All devices are capable of passing the MIL-STD-202, Method 210, Condition C "Resistance to Soldering Heat" test STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL DFP POWER RATING P25 C P25 C ELEMENT PACKAGE W W 0.25 0.65 0.15 0.65 CIRCUIT SCHEMATIC 11 12 LIMITING ELEMENT VOLTAGE MAX. V 75 75 TEMPERATURE1) COEFFICIENT ppm/C 100 100 STANDARD2) TOLERANCE % 2 2 RESISTANCE RANGE 10 - 1M 10 - 1M TEMPERATURE COEFFICIENT TRACKING ppm/C 50 50 Notes 1. Temperature Range: - 55 C to + 125 C 2. 1 % and 5 % tolerance available * Consult factory for stocked values TECHNICAL SPECIFICATIONS 11 Schematic 7 or 8 isolated resistors The DFPxx11 provides the user with 7 or 8 nominally equal resistors with each resistor isolated from all others. Commonly used in the following applications: * "Wired OR" Pull-up * Long-line Impedance Balancing * Power Driven Pull-up * LED Current Limiting * Power Gate Pull-up * ECL Output Pull-down * Line Termination * TTL Input Pull-down 13 or 15 resistors with one pin common The DFPxx12 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin (14 or 16). Commonly used in the following applications: * MOS/ROM Pull-up/Pull-down * TTL Input Pull-down * Open Collector Pull-up * Digital Pulse Squaring * "Wired OR" Pull-up * TTL Unused Gate Pull-up * Power Driven Pull-up * High Speed Parallel Pull-up DFP1411 Pin #1 DFP1611 12 Schematic ******** DFP1412 Pin #1 DFP1612 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: DFP14121K00GD05 (preferred part numbering format) D GLOBAL MODEL DFP F P 1 4 1 2 1 K 0 0 G D 0 5 PACKAGING SPECIAL Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable PIN COUNT 14 16 SCHEMATIC 11 = Isolated 12 = Bussed RESISTANCE VALUE R = Decimal K = Thousand M = Million 10R0 = 10 680K = 680 k 1M00 = 1.0 M TOLERANCE CODE F=1% G=2% J=5% E05 = Lead (Pb)-free, Tube D05 = Tin/Lead, Tube Historical Part Number example: DFP1412102G (will continue to be accepted) DFP HISTORICAL MODEL 14 PIN COUNT 12 SCHEMATIC 102 RESISTANCE VALUE G TOLERANCE CODE D05 PACKAGING www.vishay.com 328 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31513 Revision: 08-Sep-04 DFP Thick Film Resistor Networks Flat Pack, 11, 12 Schematics DIMENSIONS in inches [millimeters] Pin #1 0.250 [6.35] Min. 0.050 [1.27] Typ. 0.019 0.006 [0.48 0.15] 0.365 [9.27] Min. 0.385 [9.78] Max. 0.065 [1.65] Max. 0.825 [20.96] Max. 0.265 [6.73] Max. 0.250 [6.35] Min. 0.005 + 0.004 - 0.002 [0.127 + 0.102 - 0.051] Vishay Dale GLOBAL MODEL DFP14 DFP16 DIMENSION A 0.037 0.010 [0.94 0.25] 0.012 0.010 [0.30 0.25] TECHNICAL SPECIFICATIONS PARAMETER Isolation Resistance 11 Schematic Voltage Coefficient of Resistance Maximum Operating Voltage Operating Temperature Range Storage Temperature Range UNIT M ppm/V VDC C C DFP14/16 > 100 < 50 typical 75 - 55 to + 125 - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Model number, schematic number, value tolerance, pin 1 indicator, date code. Marking Resistance Permanency testing per MIL-STD-202 to Solvents Method 215. Solderability Terminals Per MIL-STD-202, Method 208E. Per MIL-STD-1276 DFPxx11, DFPxx12 = Type G (hot solder dipped). Hot solder dipped leads supplied as standard finish. Epoxy filled ceramic sandwich Body 11 Schematic Power Rating (Watts) Package 12 Schematic Power Rating (Watts) Package 0.65 0.65 0.50 0.50 Single Resistor 0.25 Single Resistor 0.15 - 55 + 25 + 70 + 125 + 150 - 55 + 25 + 70 + 125 + 150 Derating Ambient Temperature C Derating Ambient Temperature C PERFORMANCE TEST Power Conditioning Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Vibration Load Life Terminal Strength Insulation Resistance Dielectric Withstanding Voltage Document Number: 31513 Revision: 08-Sep-04 CONDITIONS 1.5 x rated power, applied 1.5 hours "ON" and 0.5 hour "OFF" for 100 hours 4 hours at + 25 C ambient temperature 5 cycles between - 65 C and + 125 C 2.5 x rated working voltage, 5 seconds 45 minutes at full rated working voltage at - 65 C 240 hours with humidity ranging from 80 % RH to 98 % RH Leads immersed in + 260 C solder to within 1/16" of body for 10 seconds Total of 18 shocks at 100 g's 12 hours at maximum of 20 g's between 10 and 2000 Hz 1000 hours at + 70 C, rated power applied 1.5 hours "ON", 0.5 hour "OFF" for full 1000 hour period. Derated according to the curve. 1.5 pound pull for 30 seconds 10 000 Megohm (minimum) No evidence of arcing or damage (200 V RMS for 1 minute) MAX. R (Typical Test Lots) 0.50 % R 0.50 % R 0.25 % R 0.25 % R 0.50 % R 0.25 % R 0.25 % R 0.25 % R 0.50 % R 0.25 % R - For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 329 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of DFP1411KJD05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |